Viewing entries in
Digital Media

Sending students immediate feedback with Google Forms

I have been a huge fan of Google Forms for quite a few years. I have used it for everything from collecting survey data, to getting feedback on a course, to polling students during a class. For me, it has become a necessity in the way I teach my classes. A couple of years ago, I began giving my students short, specific assessments over the assigned readings each week. Students would read an assigned article or chapter, complete some questions pertaining to the reading through a Google Form, and I would give their response a score. This system has worked well for me, but one complaint I have heard from students is that they do not have access to their responses once they hit Submit. My solution (which is really just a work-around) was for them to write their answers in Word first, then copy and paste them into the form field. I would admit to the students this was not ideal, but it was the only option. With a class of 100 students, I did not want to have to send the students their responses one by one. This constraint of Google Forms made it seem a little clunky for what I was doing.

That is, until I found out about formMule. The add-on for Google Sheets has been a major time-saver for me, and it has been great for the students as well. In short, I have been able to use formMule to send students a copy of their responses immediately after they submit them to me. The responses are not automatically graded, but the students at least get immediate feedback about whether or not their answers made it into the spreadsheet.

Disclaimer: I am going to assume a person already knows how to create a Google Form, which sends responses to a Google Sheet. This tutorial will not include an explanation about how to set up either of those tools.

Step one: Install the formMule add-on for Google Sheets

This is really the easy part. If you have already installed add-ons, then this process is already familiar to you. One nice feature of the add-ons is that once you install it on one sheet, it will be available for all sheets you have created.

Screen Shot 2016-03-06 at 3.59.47 PM

Step two: Make sure your form is asking the right questions

If you want to send your students a copy of the answers they just submitted, you must have an address to send them to. This may seem like a simple thing, but you must make sure you have a field in your form for the students to input their e-mail address.

Screen Shot 2016-03-06 at 4.06.19 PM

Step three: Setup FormMule to send responses automatically

Once the form is created (including an e-mail field), you must setup the FormMule add-on so it e-mails students their answers immediately. I want to emphasize, FormMule is an add-on for Google Sheets, not Forms. Once you create a form, Drive creates a corresponding Sheet where the data is entered every time someone completes your form. The spreadsheet will be in the same place as your form, so just go back into Drive and open it up. Once you have opened your spread sheet and installed FormMule, this process is pretty simple and straight forward. Here are the steps to complete this process:

1. Choose your data source, which should be the worksheet labeled Form Responses 1.

Screen Shot 2016-03-06 at 4.12.43 PM

2. Setup the form trigger to send a message as soon as the form is submitted. You can also setup FormMule to send the responses at a later time, which is what they call a Time Trigger.

Screen Shot 2016-03-06 at 4.22.57 PM

3. Decide how many different templates you want to send students, and the establish conditions for each template. For example, if you are giving a multiple choice quiz you can use formulas to automatically grade the responses and send students either a certificate of completion for passing or a notification that they will have to retake the quiz. My recommendation, especially if you are new to FormMule, is to start simple by sending students a copy of what they just submitted to you. Once you feel more comfortable with this process, you can branch out and try sending different messages based on specific criteria.

Screen Shot 2016-03-06 at 4.33.31 PM

4. Now you can create the message students will receive when they submit their responses. Because this is essentially a mail merge, you can integrate data from the spreadsheet into your customized response. To do this, you simply click on a merge tag and it will be added to your message. There is no text editor built into the template builder, so you will need to use good ole' HTML if you want to add any design features to your message. Below is an example of confirmation message I have created for my students.

Screen Shot 2016-03-06 at 4.39.39 PM

Step four: Test your form

For me, this is the fun part. Once you have everything setup, you need to submit a couple of responses to make sure A) the confirmation message is actually sending, and B) the message looks like you want. I have to admit, I still get a little giddy when a message is automatically sent and it looks just right. Once everything looks just like you want, you are ready to go.

Feedback from my students has been they appreciate getting a confirmation message rather than feeling like their answers are being sent somewhere into the abyss. My next post will show you how to automatically score student multiple choice items, which is a pretty handy tool for giving immediate feedback.

What strategies or tools do you use to give students feedback when they submit their work to you.

TCSS 2015

This weekend I had the opportunity to co-present in a couple of sessions at the Texas Council for the Social Studies (TCSS) annual conference in Fort Worth, Texas. I was in two different sessions, one on Friday and one on Saturday. Details and resources from each session are below.

Growing in your craft: Accessing social studies support & resources for K-12 teachers

This session was organized by Dan Krutka at Texas Woman's University, and also included Michelle Bauml from TCU and Katie Payne from UT Austin. We discussed resources and organizations in which social studies teachers can use to get ideas for their teaching. We shared some resources, then we opened up the discussion for others in attendance to share the resources they use for their teaching. The latter part of the session was excellent, and I could barely keep up as I scrambled to take notes. You can view our slides and group document below. The document is open for anyone to contribute, so please feel free to add resources you find helpful (if in fact you teach social studies).

High Tech, Low Tech, No Tech: Promoting Historical Thinking with Images

Michelle Bauml and I also presented a session on using images in social studies instruction. We knew there would be a wide variety of participants with differing levels of technology skills, so we wanted to present activities that range from no technology needed to those that require somewhat advanced technology skills. This session included several hands on activities and many examples. You can view the slides and session resources below.

K12 Online Conference 2015

I recently contributed to a panel for the K12 Online Conference 2015 about the changing role of technology in teacher preparation. The project was led by Wes Fryer, and other panelists included Cyndi Danner-Kuhn and Dean Mantz. The K12 Online Conference is completely free, completely online, and completely full of excellent presentations about innovative practices in classrooms across the country. This is my second time to be involved in a presentation, and it is a great experience.

Besides the convenience of being able to learn and collaborate without the burden of travel, this conference has an amazing reach. As of this morning, our panel discussion had 22 views on YouTube, and it was only posted today! I usually do not get 22 people in any of my conference presentations, so it is remarkable to think more and more people will get to engage with our ideas over time.

You can see our presentation description on the K2 Online Conference website, and I have also embedded the panel discussion below.

https://www.youtube.com/watch?v=ONiELpzAP9Y

Guest Post: Gamification or Game-Based Learning?

This guest post is written by TeacherJ. She is a blogger and edtech enthusiast, and in this post she explores the similarities and differences between gamification and game-based learning. Watch out for her blog!

What is More Effective Gamification or Game-Based Learning?

Photo Credit: www.audio-luci-store.it via Compfight cc

The increase in ownership and usage of mobile devices by students led to a change in the way educators deliver their learning materials and handle their classes. Research from McGraw-Hill Education and Hanover revealed that smartphones and tablets usage in 2014 skyrocketed among college students, where more than 80% were said to be using mobile technology to study. The number has jumped by 40% in total since 2013.

The trend in mobile learning (mLearning) has led to two kinds of eLearning methods: Gamification and Game-based education. You may have come across these two processes before, but you may be unsure of which is the better method to apply to your class. This article will detail you everything you need about Gamification and Game-based Learning.

Defining Terms

Before we dwell on the effective nature of the two learning methods, we will define the difference between Gamification and Game-based Learning.

Gamification: This process applies game-like features to your usual lessons, by including rules and mechanics from certain games to encourage behavioral patterns in your students. The use of a leaderboard is one of the most common gamification styles applied by many educators and even businesses today. Enterprises use the process to boost customer interaction and increase employee participation. It is expected that 50% of institutions will gamify their processes this year, as reported by Gartner back in 2011. Apart from using a leaderboard, educators can apply gamification by turning achievements into rewards such as badges, progress bars, or through a point system.

Game-based Learning: This is a learning procedure whereby participants play games to learn and understand their subject and topics better. Many educational apps for students apply game-based learning, especially for younger students who require a more interactive approach to education. One of its known benefits is its ability to enhance learners’ problem solving skills. For the younger students it has been proven to enhance their cognitive skills.

The common ground

Although gamification and game-based learning are different from one another, the two have common variables in terms of usage and their platforms. The two learning processes are very relevant due to the increasing adoption of mobile devices by students and educational institutions. The numbers presented by McGraw-Hill Education is expected to grow in the future, as more portable devices such as wearables, are set to revolutionize the classroom environment. However, the supply-side complexity becomes a common problem for many as there are various devices running different operating systems, making it difficult to create a learning process that fits all mobile users. Today, we have smartphones that have curved, large 5.1-inch screens such as the Galaxy S6 Edge which O2 says runs the latest Android 5.02 Lollipop OS, while there are handsets with smaller 4-inch screens running older Android OS.

Final Question: What is more effective?

Both learning methods appear to be highly effective for students, especially since it makes the usual boring classroom into an interactive and fun environment. As technology in the classroom changes, educators and their processes will have to evolve, too. The important matter that we have to take note here is that the two-game inspired processes aim to promote mastery of academic content. Educators will have to ensure that they apply the 3 E’s in mLearning (Engaging, Effective, and Easy) to make the most of their eLearning sessions.

What are your thoughts on the affordances and constraints of gamification and game-based learning?

Thoughts on Social Networking

This semester I created a project in which my students built and participated in a personal learning network (PLN). This is something I have done in the past several years, and I have learned a lot about particular digital tools, teaching strategies, and overall wisdom from other people in the same profession.

When something is rewarding, it's easy to assume others will immediately see the same value in an activity as I do. I mean, they signed up for my class, so they must have some interest in using digital tools to communicate and collaborate, right? Well, not exactly. The aspect of a PLN that I neglected to consider is that many of the connections I have made took years to become meaningful. That is, my personal cycle of reading/seeing ideas, trying them, reflecting, trying them again, more reflection, etc., has been a process that started a long time ago, even before I had what I would call a PLN. I became aware of two very important facts regarding a PLN:

  1. Most of the "treasures" I found from sources in my PLN were solutions, or even just tweaks, to instructional problems I had been slowly addressing over a long period of time. Many times, the stuff I discovered and found helpful was just a minor point in a blog post or forum that uniquely addressed one little thing I had been wrestling with. What I considered a major discovery amounted to little more than "what's the big deal" to other people.
  2. This was going to be a very difficult thing to sell within the course of one semester. 16 weeks. 15 class meetings. Less than 45 hours. I have easily spent hundreds, if not thousands, of hours skimming, sometimes perusing, resources from people all over the world. It may be wishful thinking to expect that 45 hours spent doing something that is meant to take much longer will actually make a difference in a student's professional thinking.

Being the adventurous type, I forged ahead knowing the results may be less than convincing. My first step was to make some suggestions for the students about which sources they include in their PLN. Building the network is the hardest part, and I knew most of them did not know how to get started. Based on my own experience, I suggested the following sources, along with their possible affordances and drawbacks.

Facebook

A hodge-podge of life events, shared videos and articles, and pictures from people who I may or may not have known in person at some point. The things they post sometimes make me want to respond, then I'm like "I haven't seen that person in 20 years! And even then I hardly knew him." There are professional groups and pages on Facebook, but I find they get buried by all of the random things people share. The few professional pages I have "liked" do not seem to be updated very often, and I end up just being distracted by cat videos.

Twitter

Twitter is like candy. It seems fulfilling at first. I read quotes and re-tweets and people's random (very concise) thoughts, and it almost seems like I am learning something for a second. And then it's gone, but I still want more. So I keep scrolling. I have found some excellent resources that consistently link to good articles and posts, which has caused my attitude about Twitter to improve in the last couple of years. Some people who I follow tend to share too much, and there does not seem to be a good way to filter. The stuff I am looking for gets buried by the people who share too much.

LinkedIn

This social network tool has always been a mystery to me. I would say about three-fourths of my LinkedIn contacts are people I know, with the remaining quarter being people I have never seen in my life. Occasionally I will get a notification that one of my "contacts" recently joined LinkedIn, yet I have no idea who this person is. Other times, I get contact requests from people in my geographic area who are clearly just trying to, well, network. I usually add the person if there seems to be some common interest, whether it is our city or field of expertise. Then there is this strange thing called Skills and Endorsements. I understand the premise behind this feature (people are willing to vouch for my skill set), but I always chuckle when I get an e-mail telling that so-and-so has endorsed me for a skill in which so-and-so knows absolutely nothing about. You mean this guy I have never met just endorsed my skills in curriculum development? He must know something I don't!

In terms of using LinkedIn as part of your PLN, they do have many Groups you can join. Some of them are centered around an organization (alumni of a particular college or another professional organization), while others are based on interests (e.g., designing innovative higher ed. learning spaces). If you want to stay caught up with the discussions, you can opt to receive updates and digests via e-mail. If you want to participate, you have to go to the website. The groups have a discussion board/forum look and feel, which is not my preference. Of all the social networks in my PLN, this is the one I refer to the least.

Google+

My first thought was, Why do I need another place to waste my time. How in the world is this going to be different from Facebook? Well, Google+ has surprised me. I have found some very active and interesting communities, and I honestly say I find something of interest every time I scroll through my feed. I have also become pretty active in my sharing within these communities. I have made some good connections, gotten good feedback, and found the experience to be enriching. (Not all of my students felt this way about Google+, but I did not consider that when giving them a grade ... ha ha.)

Blogs

I still like to follow several blogs, but I have found that sound bytes from Twitter, Google+, and Facebook have squeezed them out a little. I used to follow blogs through Google Reader, which disappeared, and now I use Feedly. I do not really make time to check in that often, but I still log in about once a month. I end up marking whole sections "as read" because I know I will never read most of the stuff. I will skim the headlines and make sure I am not missing something really good.

Here is the list of my PLN that I share with students to get them started. I have also started to dabble with Reddit and Scoop.it, but I have not used them enough to speak to their suitability to this project.

    • G+:
      • Appademics
      • Open Source in Education
      • Google Docs and Drive
      • Best Educational Apps for Kids
      • Higher Education & Technology
      • Technology in Education
      • Technology & Innovation in Education
      • EdTech and Professional Development
      • Educational Apps for Kids
      • ISTE Teacher Education Network
      • Educational Technology
      • Gamification in Education
      • EdTech
      • Connected Learning
      • School Technology Leadership
      • Google Apps in Education
      • Google Hangouts in Education
    • Twitter:
      • Edutopia (@edutopia)
      • EDpuzzle (@EDpuzzle)
      • Socrative (@Socrative)
      • Wesley Fryer, PhD (@wfryer)
      • WeAreTeachers (@WeAreTeachers)
      • TechSmith (@TechSmith)
    • Blogs:
      • Alice Keeler
      • Tony Vincent
      • Two Guys and Some iPads
      • Moving at the Speed of Creativity
      • Daniel Willingham

So, what are your thoughts on different social networks when building a PLN?

Managing Learners: Tools for organizing your class

Of the many ways ITC has changed (and is changing) education, none seem more obvious than e-mail and learning management systems. It seems students these days expect ubiquitous, continuous access to course content and their teachers. How do I know this? Well, for one, I commonly get e-mails from students in the middle of the night. I am no longer surprised when I wake up in the morning to e-mails from students, most of them sent well past midnight. I do not think they expect an immediate response, but it reveals a student's mindset when you see he has sent a message in the middle of the night the instant he had a question about an assignment or grade. Second, my students are quick to let me know if they cannot access a course document or cannot see their grade. If the gradebook in my LMS were a section of the Oregon Trail, it would look like this.

The course syllabus? It probably looks more like this.

I am digressing. Anyway, teachers these days must anticipate the "right here, right now," mindset of many students and parents. Over time, report cards were augmented by weekly take-home folders, then daily homework planners, and now the LMS has crept into K-12 schools. Some schools have adopted an LMS that every teacher is expected to use. This was the case at the private school where I worked a few years back. Teachers at this school were expected to post grades, assignment details, worksheets, and other announcements each week. In other cases, a teacher may choose, independent of the rest of the school, to use an LMS in this way with students and parents.

This past week in my class, we explored various options available to teachers who want to use an LMS for managing learners and organizing content for their class. Before we looked at any platforms, we discussed the features one would expect to see in a LMS, and we listed them on a shared Google Doc, which the students filled out as they explored. Here are the results of our exploration.

Features Edmodo Chalkup Homeroom
Upload course materials
Upload materials in a variety of media (e.g., post a video for students to watch)
Discussion tool
Message tool
Announcement tool
Dashboard with upcoming assignments
Submit assignments
Submit using a variety of tools
Quiz tool It may be there, but we couldn't find it
Embed content from other sources Only from pre-selected sources
Features of this tool that may be particularly appealing. Links to Google Drive, Archives class data, calendar linked to assignments for multiple classes. Teacher can annotate papers, messaging feature, flashcards Interfaces with Apollo (the BYOD presentation tool). Quizzes can be tracked in realtime using a simple dashboard.

There are some obvious omissions on this list: Schoology and Google Classroom. This is mainly because we only had 2 hours and 40 minutes, so I had to make some choices about what to analyze. We already had someone demonstrating Edmodo, and I felt like Schoology was similar enough to skip past it. Some of the students actually mentioned it as we discussed Edmodo, and they were able to identify the similarities and differences themselves. I would have LOVED to show the class Google Classroom. I would love to see Classroom for myself, for crying out loud! Yes, most of their tools and features are available and free to everyone, but there are some that are not. This is especially true of GAFE, where if you are not in the club, you are WAY out of the club. So, this class exercise was not exhaustive, but I believe it gave the students an in-depth look at different ways to design an interface, features to include and leave out, and how easy different tools are to use.

What am I missing (and don't say Google Classroom!)? Are there features or whole platforms I didn't address?

Using Google Drive as a file server

Have you ever been in a situation where you need to host several files on the Web? Did you need for those files to have a dedicated URL? Personally, I have had few situations where this was the case, but today I encountered a learning activity that required students to quickly upload images they just captured so they could add them to a Google Map. After some searching around, I found that the Google Drive hosting API is perfect for this sort of thing. Here is what I did ...

Create Drive Folders

The first thing I had to do was create a set of Google Drive folders for students to put the images they just captured. For this activity, students were running around our university taking pictures of some of the landmarks. They were then going to use these images to create an interactive map of the campus with the My Places tool in Google Maps. I created several folders in a Google account I use only for this class. My TA's and I connected a class set of iPads to this account so the students could load their images directly into Drive, which is what they did as soon as they got back to the classroom.

An important step in this process is to set the permissions for the folders to Public. You can do this directly through Drive. You will find the folder, right-click and choose Get Link.

 

Screen Shot 2014-11-11 at 10.56.52 PM

 

You will then need to change the permissions. Google has a great explanation for how to do that right here.

Set Up the Hosted Site

This part is actually much easier than you might think. The first thing you need to do is grab this little URL:

http://googledrive.com/host/<folderID>/

Not sure where to find the folderID? I discuss it in this post. The URL will end up looking something like this:

http://googledrive.com/host/0B5YVN51uO5e_WGtSc2tBDB2bUk/ (don't worry, it doesn't work)

Google will add some characters to this URL as soon as you hit enter, but don't worry. It will work just fine. Here is an example of the files my students uploaded today. Screen Shot 2014-11-11 at 11.04.13 PM Once students have found the image they need for their project, they will need to copy the URL so they can paste it (above).

Note: The only files that will show up in the hosted folder are image, video, document (Word, PDF, etc.), and HTML (and other web-authoring files). Google Docs, Slides, Sheets and Drawing files will NOT show up in the hosted folder.

In my case, the students were pasting these URLs into a Google Map placemark so their images would show up when the placemark was clicked. Several of them held the iPad the wrong way, so their images are sideways. (Sigh.) Here is the map we created in class.

So, that's it. Students can take images, quickly upload them to a Google Drive folder, and they are instantly hosted on the Web with a dedicated URL. No logging in, no FTP, clunky photo albums. Just my files and their URLs. I don't think I will need this functionality all that often, but it sure will be handy when I do.

Update on embedding Google Drive folders

As I have written about before, embedding Google Drive folders is a great way to manage content on your LMS. Rather than logging in, uploading, and waiting, you simply copy files into a folder on your computer, and they magically show up in your LMS for students to view.The only drawback was that last year Google blocked iFrame embedding on all Google Drive folders and Google Sites pages.

 

Thankfully, Wes Fryer posted about this same thing and I was able to get back on track using the following code.

List view <iframe src="https://drive.google.com/embeddedfolderview?id=FOLDER-ID#list" width="800" height="600" frameborder="0"></iframe> Grid view <iframe src="https://drive.google.com/embeddedfolderview?id=FOLDER-ID#grid" width="800" height="600" frameborder="0"></iframe>

Finding the Folder ID can be a pain, especially if you are trying to embed a folder within a folder within a folder. I tend to create folders for everything, so I have to make sure I use the correct Folder ID. For example, here is the URL for one of my folders that is nested 4 folders deep. I have color-coded each level of the URL (which has been slightly altered to keep the folder private).

https://drive.google.com/drive/u/0/#folders/0B5YVN51uO5e_ZHZlc3Zxd09pU3M/0B5YVN51uO5e_VlhYN1Q3MVoydjA/0B5YVN51uO5e_ei1aYmdFcW9EUWc/0B5YVN51uO5e_TFJkYzFhZ0ltbWs

The last sting of characters is for the folder I actually want to embed. I just need to copy that code and paste into the URL above where it says FOLDER-ID, like I did below:

<iframe src="https://drive.google.com/embeddedfolderview?id=0B5YVN51uO5e_TFJkYzFhZ0ltbWs#grid" width="800" height="600" frameborder="0"></iframe>

You can always change the width and height to make the folder fit the space on your page. The process is pretty simple, and once you have done it a few times, it's actually quite easy. Good luck!

5 Ways to Find Out What Students are Thinking

Bored Students Student participation typically falls into two extreme ends of the class discussion continuum. Some students raise their hand every time I ask a question. These students have an opinion on just about everything, and if I'm not careful they will dominate class discussion. I have had experiences where the same 2-3 students will talk so much during discussions that the other students will stop raising their hands. As a teacher, this is definitely a scenario you want to avoid. The end of the spectrum is characterized by a roomful of students who are so disengaged they will barely make eye contact. Maybe they didn't do the class reading, or perhaps they think that avoiding discussion will shorten class time and end in an early dismissal. Perhaps the class is large and students are intimidated speaking in front of the group. Either way, it makes for a very awkward and aggravating situation.

The longer I have taught, the more strategies I have discovered for getting the entire class involved in discussion. Early in my career I would just pose questions to the entire class. I eventually learned simple strategies like using cards or popsicle sticks for calling on students who don't raise their hands. This helped me get more students involved. Still, getting called on was a game of chance and some students would tune out in hopes that their number wouldn't get called. I eventually started using some different pedagogical strategies such as Think, Pair, Share, Numbered Heads Together, Jigsaw, Jeopardy, or Fishbowl for engaging students in discussion prompts. Each of these techniques for facilitating discussion got everyone involved and had more accountability than sitting in class hoping not to get called on.

Even with great discussion strategies, there are times when I want to know what the students are thinking. This isn't always possible when the majority of the discussion is a verbal exchange. I have used chart paper or construction paper to have students summarize their thoughts, but this is not always easy to present and when it's all over I'm stuck with a bunch of chart paper.

With the emergence of free (or kind of cheap) web-based and mobile apps, teachers can find out what students are thinking in a variety of ways, and all without using up all the consumables. I will describe five tools I have used in my classes to put student thinking at the forefront of the discussion.

Socrative

This is a free app that has iOS, Android, and web-based options. Students enter in the class code then wait for a prompt from the teacher. Results are instantly aggregated on the screen, giving everyone real-time results from the prompt. There are several options for prompts teachers can send the class, including T/F, Multiple Choice, and Short Answer. Prompts can be generic (i.e., A, B, C ...) or prepared in advance with specific answer choices. Results from saved quizzes can be downloaded as a spreadsheet for further analysis or grading.

Socrative is a great tool for quick discussion questions where you A) want students to talk about a prompt and B) get fast statistics on what everyone is thinking. I have had students use the mobile app on their phones many times, and it almost always works like a champ. I just post the question, students grab their phones, and within minutes you have a bar graph populated with student responses. This can actually prompt further discussion.

ActivePrompt

Another way to find out what students are thinking is to have them place a dot on an image. When enough people do this on the same image you can start to see trends and hotspots. I have done this with continua (e.g., Place a dot on the continuum where you believe the responsibility lies for a positive classroom: Teachers or Students), maps, quadrants, or other diagrams.

When you upload an image to ActivePrompt, you are given two prompts: one for the students to place their dot, and one with all of the dots displayed. You can try this using the following URL:

http://activeprompt.herokuapp.com/SBGWN

You can see the results here:

http://activeprompt.herokuapp.com/TWBUN

I have used this tool in class several times, and it has always been reliable. Students will typically discuss a prompt in pairs, place their dot based on their discussion, then we will discuss patterns and themes as a class.

InfuseLearning

This tool has many of the same features as Socrative, but it has the extra benefit of the InfuseDraw tool. Teachers send students a prompt on which they can draw, annotate, or label an image. Results are saved in the teacher dashboard and can be downloaded as a PDF. Like Socrative, the students do not need an account to log in. They just enter the class code and they are ready for the teacher to send the prompt. The few times I have used this tool it has worked great. Since Apollo, my class-syncing tool of choice, has some of the same features I tend to use that tool instead. However, if you are looking for straight prompts without having students follow your presentation on their screens, InfuseLearning is the way to go.

Google Presentation

I have already written about how to use this tool before, so I won't spend a lot of time explaining how I have used this activity in class. You can do the same thing, or something similar, with Google Docs or Draw, but I like the features in Presentation and the fact that you can assign each group a different slide in the same file.

Google Forms

If you are wanting to get more extensive feedback from students, Forms is the way to go. Results from the forms are instantly sent to a spreadsheet. We all know that spreadsheets are like magic because of all you can do with them. With the emergence of Add-Ons, you can now do even more. Some examples of ways I have used Form data: display the automatically-generated pie graphs, randomly choose responses directly from the spreadsheet, cut and paste the responses into Wordle for an (almost) instant word cloud, or e-mail the students a badge once they complete a set of prompts or an activity (this is not done in real-time ... usually after class).

Since the types of items you can use in a Google form are so diverse, there are many opportunities to use this tool to facilitate discussion in class. Responses are anonymous by default unless  you include an item for names. This tool will require some preparation before class, but that is true of most that I have mentioned here. It's one thing to send out an impromptu poll using Socrative. It's something quite different to make my students sit and watch me create a Google Form. Overall, this is a great tool to keep in the box and use when it fits your instruction.

The importance of discussing and reflecting on learning experiences is pretty well documented. When we give students the opportunity to verbally process their thinking, we increase the chances that they will be able to retain and apply skills and knowledge after the fact. Discussion and reflection helps us give new information personal meaning. Good class discussion starts with good pedagogical practice, but with new tools there are even more opportunities to make it relevant, engaging, and active.

What tools or strategies do you use to facilitate class discussion and find out what students are thinking?

Ripple Effect

Screen Shot 2014-05-08 at 9.00.09 AM Last fall I taught a class on Digital Communication and Collaboration. We talked about, among other things, the power of creating a PLN (personal learning network). We read a book on this topic, shared a few articles, and had some interesting discussions. What we never really did was create or participate in a PLN in a meaningful or transformative way. This included me, who had always been a solitary and introspective kind of guy. I followed a few blogs and tweets, but I was not an active participant in any kind of PLN. This makes teaching the benefits of a PLN a really hard sell, to say the least. At the end of the semester, I was determined to change that.

I started this blog in 2009, and until this January had never had more than 20 views in one day. I would post sporadically and rarely shared anything I wrote. The blog, for all intents and purposes, was a sandbox for me to kick around ideas and journal some of my experiences as an instructor, faculty member, and techie. My total number of views (if those analytic statistics can be trusted) from 2009 to 2013 was roughly 1,800. My point is, I was not breaking any kind of internet records with my blogging skills. On a side note, let me just tell you that keeping a blog going is hard work. This is due to the fact that:

  • I'm one guy
  • It's not my job
  • TCU and my family keep me quite busy
  • I am not a fount of awesome ideas

Having shared this, you can see that the baseline was quite low and any movement of the needle would be easy to detect.

Coincidentally, around the beginning of the spring semester I shared some tech ideas with my college in a faculty meeting and decided to write them up in a series of blog posts. Based on my experience the previous semester in my class, I was already connected to several communities and groups on Google+ and Twitter. So, I thought why not share my posts in those communities and with a few folks via strategically placed tweets. What happened next really opened my eyes to the potential of connected learners and social media.

On the image above, you can see in green where I wrote something new on my blog. I blurred out the dates and stats because I guess I'm kind of self-conscious and it kind of feels like taking a screenshot of my bank account. Anyway, as soon as I was done with my blog post, I would send it out to a few different Google+ communities and on Twitter. The orange arrows represent the activity around that post from those communities. This consisted of sharing, retweeting, scooping, e-mailing, Facebooking, etc. my  content with others. Since I use Wordpress, I was able to see the source of my web traffic. The buzz would wane over a few days, then sure enough someone else would pick it up and share it again, causing my stats to spike again (though never as much as the first time).

An interesting observation from this is the 3rd green arrow. I posted this but decided not to share it with my usual peeps. It was more introspective and not really that interesting to most people. Someone who follows my blog, however, shared it on Google+ and Twitter a few days later, causing quite the spike in traffic for a couple of days.

This has been an interesting and serendipitous experience, to say the least. I am a self-described technology ninja, an emerging technology samurai, and not really a technology shogun (leader) at all. Jumping into the world of sharing, re-sharing, and joining the larger ed. tech. conversation has definitely let me see firsthand how powerful this can be in a person's personal and professional life.

And yes, I plan on sending this out for the masses to read, share, and re-share. If you want. No pressure.

Are You a Technology Ninja or Samurai?


ninja-samurai

I will start by stating the obvious: There is a HUGE difference between learning to use technology for yourself and using it effectively in the student learning process. Both applications of technology have specific skill sets, they inform each other, and they are both important. In the educational technology world, you might see this dichotomy through various lenses: digital media literacy, TPACK, SAMR, or some other framework you're fond of presenting at conferences.

My awareness of the massive difference between these technology applications came when I began encouraging the students in my large, 100-person education course to bring their laptops, tablets, and phones. OK, I don't have to actually encourage college students to bring their phones to class. Pry them out of their hands? That's more like it. Anyway, once I began infusing my class with activities that require technology, I realized I am not as good as teaching with it as I thought I was. Yes, I knew how to do some cool things to present information to my class, but when it came to using technology in real time with 100 students in a way that kept them active and engaged, I had a lot to learn. This is when I decided I was a pretty good Technology Ninja, but I had a long way to go until I was a Technology Samurai.

What do these two terms mean? Let me explain.

Technology Ninja

Ninja were covert agents who specialized in espionage, assassination, sabotage, and infiltration. They were skilled at disguising themselves as servants, camouflaging themselves with trees and other objects, and scaling the walls of buildings like Spider-Man. Their objective was to infiltrate enemy dwellings without being seen. In fact, there is probably a ninja in your pantry right now, scooping out your peanut butter with a Chinese Throwing Star.

As a Technology Ninja, I have gotten really good at using technology in ways that my students hardly know it's there. My most recent set of posts about Outsmarting the LMS is a good illustration of ways to be a Technology Ninja. You can embed documents and web pages, install scripts, and set up forms to make your job easier, and the people actually using these tools have no idea about the magic you have worked on the back end. They just know it works.

While these ninjutsu techniques save me a lot of time and energy in the long run, they do very little to influence the lived experience of my class meetings. Most of the work is done in the background, usually in the form of tinkering, testing, and modifying. It wasn't until I told my entire class of 100+ students that I wanted them to bring their devices to class that I realized these skills were not sufficient for me to reach the level of technology greatness I have always aspired to achieve.

Technology Samurai

When I first began thinking through these ideas, I wrote this out as SAMRi. Get it? SAMR with a lower-case i, like Apple does, only at the end of the word instead of the beginning. Because I am aiming for the R (redefinition) in SAMRand after I achieve the R in my technology integration skills/knowledge, then I will be a technology SAMRi! Uh ... yeah. Anything that needs that much explanation is not as clever as I initially thought it was. Also, SAMRi would direct a lot of traffic to my blog by people looking for Saudi Arabian folk music.

So, what is a Technology Samurai? The traditional samurai were an elite class of noble Japanese warriors, dedicated to protecting their culture, leaders, and territory. Unlike those stealth and sneaky ninjas, they were skilled at hand-to-hand combat and infantry tactics. Their weapons of choice were swords, kama, longbows, daggers, and armor. They were skilled horsemen, and they were also known to use rifles and cannons in the latter years of their existence. Samurai were also governed by a strict honor code, characterized by discipline and loyalty. In a word, they were fearless.

You know what else is fearless? Telling your class to BYOD. Unless you have thought through the details of your activity, you will have students knee deep in Pinterest or Facebook before you can say, "OK, let me just try one more thing to get this to work." Students love technology, but not in the way nerds like me think they love it. They love that technology connects them to the things they love.

So, after having done this for a semester, I have started coming up with a few essential skills that every Technology Samurai must master. These skills/tools are focused primarily on teaching in a BYOD or 1:1 environment. I will address being a Technology Samurai in the areas of digital media projects, collaboration, research, etc. in the coming weeks.

Sync your class

You must have a way to get every student in the same place and keep them there. Your class LMS page won't work. Neither will a Facebook group or Schoology or Edmodo. Why? There are too many other features to look at. Grades, assignments, forums, friends. Too many distractors. You need to keep them all in the same place at once. I recommend a tool like Apollo or Top Hat. If all of your students are on iPads, you may consider NearPod. Each of these tools has something in common: they put your content on every screen in the room at the same time. Yes, students can stray away, but not as much as you might think.

Reduce Friction

This is something that took me awhile to figure out. Personally, I do not like logging in to things. I would much rather log in once and then have the tool remember me. Google, Facebook, Pinterest, Twitter .... they are great at this. My school's LMS? It's like Guy Pearce in Memento every time I close the browser window. Whenever possible, I try to minimize the number of times students have to log in to do class activities. Once is ideal, twice is acceptable, three times is just getting to be plain annoying.

Collect student responses

In addition to getting all of the students in one place, virtually speaking, you want to keep them engaged. A good way to do this is to involve them in activities that make them think then require a response. There are several tools that will let you do this. Apollo and Top Hat have built-in student response features. Socrative and Infuselearning provide another way for students to respond, and they do not have to set up an account to do it. They just enter the class code, and they automatically receive a prompt every time the teacher posts a question.

Deploy links

Another important tool to have in your arsenal if you are going to teach like a samurai is to be able to deploy links to the class. By deploy links, I mean send the student out from your synced content to other content (videos, web pages, forms, etc.). Apps like Apollo and Infuselearning have a built-in link tool that will send a URL to every student logged into your class page or presentation. This is really handy if you want students to spend a few minutes reading and discussing an article, blog post, video, or image. You can also send the students to an editable Google Doc, Sheet, or Presentation if you want to give them a place to discuss or share ideas.

An acceptable alternative to sending links to students is using a URL shortening tool, like bit.ly or goo.gl. Just remember to use a serif font so the students can tell the different between capital I and lower-case L. You may also want to consider if this is appropriate based on the size of the room and projection system, the age of the students, and number of times you are having them key in shortened URLs. If you have a bunch of these on the board, it may get confusing to the students.

Facilitate group work

Another skill to master as a Technology Samurai is to keep students engaged in group activities with their computers. I mean, the students have lugged their computers to class and followed along up to this point, so why not do some things with computers that computers are uniquely good at doing. Maybe that involves editing the same document at the same time, or adding slides to a common presentation. You can have them pin and explain places on a map.  Annotate or draw images using the drawing quiz tool in Apollo or Infuselearning. Create a 5-picture story, or capture a 30-second explanation on Educreations. I'm not trying to exhaust the possibilities here. If you went to the trouble to have the students bring their computers to class (or went to the extreme trouble of providing a device for every student in the school), then leverage the capabilities of a computer. Don't use it like a pencil then complain that students just want to look at Pinterest.

Showcase the students

Now that you have had the students doing some activities on the computer during class, showcase their work. Display their annotations and diagrams. Flip through the presentation and let each group present their page. Show the 5-pic stories and see if the students can guess the topic. Watch the 30-second explanations. This part of the BYOD learning environment is more than the payoff. It's the point in the lesson in which you communicate to your students whether you, as the chief learner in the room, value this activity as a real learning endeavor or just a hi-tech time filler. If you truly value the work they are doing, then devote time to acknowledging, praising, critiquing, and sharing the fruits of their labor. If you blow past the showcase, don't be surprised if the students show less enthusiasm and engagement the next time around.

You should strive to be both a ninja and a samurai. A samja. A ninjurai. A SAMuRinja. Both skill sets are important for teachers these days, for different reasons. One will keep you learning, the other will help you focus on student learning. The way of the ninja and samurai is not easy. They involve risk, uncertainty, failures, faith, persistence, patience, creativity, and problem solving. There is great cost in becoming a lifelong learner, but it's not nearly as costly as settling in and ceasing to grow and develop as a teacher.

So, what are your examples of being a Technology Ninja or Samurai? I will follow up on this, and I would love to hear your ideas.

Some Bullet Points and a Picture

As a teacher, I am always making instructional decisions. More often than not, these decision manifest themselves as questions. What do I want the students to know, understand, or be able to do at the end of my lesson? Who will do most of the talking, me or the students? Where does this lesson fit in the big picture of the class? Will I use technology? Will the students use technology? In addition to asking myself these questions, I am also continually looking for ways to teach better. That includes instructional strategies and technology. In some cases, the stars align and I discover strategies in which technology allows me to teach a lesson in a completely new way. For those SAMR enthusiasts out there, this would be R, or redefinition.

One such idea I recently came up with is an activity I call Some Bullet Points and a Picture (SBPAP). Yes, I have a dry sense of humor. This activity builds on the time-tested teaching strategy of having students work in groups and put their ideas down on chart paper. I love this activity, especially for class reading activities. I will assign an article, divide the class into groups, have them read a specific section of the article, then summarize and share their section with the rest of the class. This is a great way for the students to take ownership of the article and teach it to each other. It also gives them an advance organizer for when they go back and read it again for the exam.

SBPAP is the same idea as using chart paper, but the students summarize their group discussions on separate slides in a Google Presentation. I did some minimal setting up before class by creating the presentation, making it editable for anyone with the link, and creating a separate slide for each section of the article. The students then went to the Google Presentation, found their slide, and began summarizing their section of the article. The only two rules were 1) they had to paraphrase every main point in their own words, and 2) they had to find a picture that characterized their main points. The students used the research tool to find their images so they did not have to leave Google Presentation. Overall, the students loved the activity and we had a lot of fun seeing everyone's slides get edited at once.

There are some obvious advantages to doing this activity with a Google Presentation instead of chart paper:

  • The summaries are all in one place, so I can see which groups are making progress and who is not
  • Since the students are all working on the same presentation, I can project it and have each group present their ideas
  • The research tool allows the students to search for images, videos, quotes, charts, facts without leaving the presentation
  • After the activity is over, I can export the presentation as a PDF and post it to my LMS
  • The slides give me a record of what we covered in class, especially for students who missed and want to know if we "talked about anything important"
  • I don't have to figure out what to do with the chart paper after the activity is over

SBPAP was a great way to engage the students and have them actively learn the content. I will definitely do this again, and I may even think of some other ways to modify this activity and leverage more features of Google Presentation.

What are some innovative ways you have used Google Presentation in your classes to facilitate group work or engage the students?

Move over LiveSlide ... Hello Apollo

Apollo IconA few weeks ago, LiveSlide got a complete overhaul. So complete, in fact, that it was given a new name. I have written before about how much I enjoyed using LiveSlide, and I am happy to report that my overall satisfaction with this tool has not changed at all since I first started using it. I would like to go over a few of the new features that I really like about Apollo. First of all, Apollo is a classroom presentation/engagement tool. Imagine a classroom full of children with devices or computers, such as iPads or Chromebooks. Imagine instead of projecting your content on one big screen and requiring students to follow along, you could project your content onto every screen at the same time. This is exactly what Apollo does, but the newly updated version does so much more.

Slide Sharing

The main feature of Apollo is that it lets the teacher set up classes and share presentations with students on multiple platforms. Since this tool is completely brower-based, students can access the content from phones, tablets, and computers. Students can create an account in minutes, and for a small subscription they can access all of the decks from a class anytime they want. The free account allows students to follow along while the teacher is presenting, but they don't have access to the decks outside of class.

The teacher can set up the decks to advance all at the same time, or students can browse the slides at their own pace. There is also a tool for taking notes, though this would only be necessary if the student has the subscription. Several of my students have paid for the subscription, and they have liked being able to review their notes and the slides (with my annotations from class) when preparing for a test.

Annotations

The teacher screen features several different tools for annotating slides during a lesson. The tool I use most is the pen. I have surprised myself at how often I write things down on the slides, or draw arrows and circles for emphasis. I guess I have used PPT for so long, I forgot this is what teachers actually did when chalkboards were cutting edge technology! The eraser tool from LiveSlide is gone, which is a little annoying. I do like to be able to erase things when I make a mistake, so hopefully that feature will come back.

Control

The feature with the most promise is the ability to hand over control of the slides to a student. The student must be signed in to the class to do this. Once there are students signed in, I can pass off control and they will be able to annotate the slides for everyone or advance the slides. This has a lot of potential for group work and gathering formative assessment about their progress. In the past, I would have groups stand up and share what they talked about. Now, I can give them control and let them show their work instantly on the big screen.

Assessment

A new feature to Apollo is the ability to quiz students on the fly. The multiple choice tool has been there all along, but now you can turn a slide into an assessment by having students annotate or draw an image. Their drawing is instantly saved to the deck, and you can get quick feedback about their understanding of a concept. For example. you could create a slide with an image of a plant cell. While you are on that slide, you add a Drawing Quiz. When the students get to that slide, they will be prompted to draw on the image (e.g., label the parts of the cell) and submit their answers. The images then show up in a dashboard for you to look at. You can also add the student submissions to the presentation if you want to show it to the class.

Web Content

One of the hardest things about teaching in a BYOD environment (at least for me) is deploying links for everyone to view. In a computer lab, I can use SMART Sync or LANSchool to send content to all of the students, but this is much harder in a classroom where everyone is on their own computer. I have tried shortened URLs with bit.ly or goo.gl, but I still have to stop what I am doing and write the address on the board. With Apollo, I can add a URL to a slide, either in advance or on the fly, and it instantly creates a link in the lower right-hand corner of the screen. Students can then click on that link and view the content I have pushed out with minimal disruption to instruction.

I can do the same thing with videos. By simply adding the video URL, Apollo identifies the video and embeds it into the deck. So, rather than put a class full of students asleep watching a video on a big screen, I can have small groups of students huddle around a small screen and discuss a video. I have already done things like, "Stop the video every time you see [blank] and discuss what you think the teacher will do next." It's much more active than just showing the video and trying to discuss it as a whole group.

Recording

One feature I have not used yet is the ability to record a presentation while I am presenting. In order to do this, you have to download the native app and present from a laptop. I haven't really had a reason to do this yet, but I will play around with it this summer when I have some time.

There are many things I like about Apollo. I like that their team is so responsive. One of their reps actually drove to my campus to watch me use it in action, and gave me some feedback for adding students to the class. I like being able to wirelessly control the slides from my iPad and walk around the room while the students have the same content on their screens. I love being able to add links, blanks slides and video on the fly for students to view. Even more than that, I really, really love being able to annotate the slides in real time. No lag, no awkward angular lines ... just my good ole' terrible handwriting for the students to behold in all its glory. Apollo really is a great tool for teaching in a BYOD class. You can learn more about Apollo at their YouTube channel.

I would encourage you to give Apollo a try. I am also interested in hearing about other strategies for keeping students engaged and active in a BYOD environment. Let me know of your ideas, I would love to hear them.

Outsmarting the LMS: Creating a DIY Learning Module

Everyone is talking about the "flipped classroom." I just attended a conference where this term was used approximately 57 times every hour for 4 days. My first response to this term was positive when I heard it a few years ago.  The flipped classroom is a teaching approach where teachers provide resources for students to build their background knowledge outside of class and use class time on activities that leverage face-to-face interaction, such as discussion, group problem-solving, and collaboration. This contrasts with the "traditional" model, where instructors spend class time transmitting information, and then require students to engage in the aforementioned higher-level learning tasks on their own outside of class. This concept has so much curb appeal because students, generally speaking, don't like lectures, and instructors don't really like the behaviors associated with lecturing (e.g., falling asleep, playing on phones, doing homework for other classes). Once you strip away the buzz words, the descriptions of "kids these days and their mobile computer thingies," and a mish-mash of learning theories, you realize the basic premise is the same model teachers have used for years. My teachers assigned reading outside of class, my coaches required me to lift weights and do endurance runs (yes, I'm a runner) on my own, and my music teachers expected me to practice my part so that group rehearsals were about dynamics, tempo, and other music terms I can't seem to recall. The difference, of course, is that technological innovations have changed the variety and delivery method of learning materials being pushed to students before they come to class. Teachers can compile videos, readings, simulations, quizzes, games, and other media to communicate the same concepts that were traditionally transmitted in class via lecture.

There are many tools on the web that help an instructor facilitate a flipped lesson. EdPuzzle, eduCanon, and Ted-Ed come to mind. Each of these tools has its unique affordances, but they require students to have an account and to sign in. What if you want to avoid that part and skip straight to the learning module? This is where Google Drive comes in. I will briefly demonstrate how to build a DIY learning module with Google tools and add-ons.

Step 1: Create a Google Form

Google Forms is an excellent tool for creating web-based surveys. Users can add a variety of questions, from simple text to a grid. There are also some simple media and layout tools, such as adding images and video, page breaks and section headers. These are all great tools if you want to manage the flow of the survey. Google has created some excellent tutorials on how to create and use their forms. Below is an example of one of my forms I created a for a learning module in my college. The videos were created by a state agency for the purposes of a required training that is no longer supported by said agency. In other words, they gave us the videos and want us to handle the training in-house.

Texas_Ethics_Online_Training_-_Google_Drive

Step 2: Set up the spreadsheet

The results from this form will automatically feed into a Google Spreadsheet. This is a great way to keep track of who has completed the training, but by itself a spreadsheet is not very useful for grading the quiz. Using a simple script for Google Sheets called Flubaroo, you can create a key and automatically grade the results. The scored quizzes are put in a new sheet within the spreadsheet, and it will also e-mail the results to each student, if you choose that option. I have the spreadsheet set up so I am notified every time there is a change. Here is a example of a graded quiz.

Texas_Ethics_Online_Training__Responses_

Step 3: Create a certificate of completion

In my case, the students and faculty who complete this training need a certificate. The state agency used to do this automatically through their training module, but now we have to do it. Since there are so many people completing this training, I needed a tool to automate most of the process. My tool of choice is the Google Docs add-on Merge by MailChimp. To do this, you first add the add-on to your Drive account. You then create a merge template, like the one below:

Copy_of_Ethics_Texas_Certificate_template_-_Google_Drive

Next, you open the Merge by MailChimp panel.

Screen Shot 2014-03-25 at 9.36.06 AM

You will need to do some clicking to merge your two documents by:

  1. Choosing the spreadsheet you will use as your data source
  2. Choosing the sheet from within your spreadsheet
  3. Identifying the header row (which will determine the names of the merge tags)
  4. Identifying the column with e-mail addresses, where the merged documents will be sent

Copy_of_Ethics_Texas_Certificate_template_-_Google_Drive 2

You will also need to add merge fields to the document, which will pull data from the spreadsheet and input it into the template. You do this from the Merge Tags section in the MailChimp panel by simply placing the cursor in the document where you want the merge tag and clicking  the merge tag in the panel.

Copy_of_Ethics_Texas_Certificate_template_-_Google_Drive 3

The form that is mailed to each person in your spread sheet will look something like the screenshot below. Notice, the person's e-mail client may strip out some of the formatting, such as fonts or colors. The details at the bottom of the merged document were added from the Email Info tab in the MailChimp panel. Also, the merge fields in the actual e-mail will not have brackets.

_Test__Texas_Educator_Ethics_Training_Course_certificate_-_curbyalexander_gmail_com_-_Gmail

And there you have it. Yes, it is pretty involved, but not much more than doing the same thing through SoftChalk or iSpring or any other eLearning tool, and it is totally FREE! This method could be used to give students survey or test results with feedback, digital badges, or progress reports. I should add one final word, which is that there will be some tinkering along the way. Each tool I presented here has a learning curve, and unless you have used mail merge in MS Word before, this will take some patience and repetition. Coming from someone who has done this using just about every possible method and tool, this process is pretty slick once you get used to it.

So, what tools do you use for this type of learning object? Is there a step I am missing or an easier way to do this? Let me hear from you.

Outsmarting the LMS: Download Links for Google Docs

As I have stated before, embedding a Google Doc in your LMS is infinitely more efficient than yo-yoing documents up and down from the server every time you must edit the document. You paste the embed code one time, make a couple of minor modifications, and every edit from that point on is made directly to the Google Doc. It really is that simple. The main downside to this method is that students have a hard time printing the document. Remember printing? Paper? That strange material formed from mushed up trees that can tear, slice your finger and never seems to run out of battery? Yes, many students still like to use it, and unfortunately the method I described in my previous post does not lend itself to printing at all. In fact, it is quite frustrating for the students, not to mention wasteful. Basically, your browser will print the entire web page as it displays on the screen, not just the document.

So, how does an instructor address this? Well, you could always upload a PDF or Word version of the document to the LMS that students can download and print. But wait? Doesn't that put you back in the same dilemma of uploading a new version of the document every time you make a change to the Google Doc. That actually seems like DOUBLE the amount of work!

Wouldn't it be great if you could create a link for students that lets them download the most recent version of the document in a format that is easy to print? Thankfully it is possible, and I will show you how.

Step 1: Locate the Document ID

Each file hosted in Google Drive is given a unique (ungodly) ID, which can be found in the URL of the file. See the example below:

Embedding_Docs_in_eCollege_-_Google_Drive-9

Step 2: Create a download link on the document

You will need to create a link on the document that students can click to download a print-friendly version. I put the link at the top of the document because students ... well, many of them aren't fond of scrolling. Here is an example of the download link. I tend to type the text first, then I add the URL next.

Embedding_Docs_in_eCollege_-_Google_Drive-5

Step 3: Add download URL to the link

Now that you have a link for students to click, you need to add a URL that will prompt the browser to download the most recent version of the document. This URL will vary based on the type of Google file you are working with (e.g., spreadsheet, document, drawing, presentation). The code for each type of URL is below:

  • Google Document : https://docs.google.com/document/d/[FILE_ID]/export?format=[FORMAT]
    • FORMAT : docx, odt, rtf, pdf, txt, html
  • Google Presentation : https://docs.google.com/presentation/d/[FILE_ID]/export?format=[FORMAT] 
    • FORMAT : pptx, pdf, svg, png, jpg
  • Google Drawings : https://docs.google.com/drawings/d/[FILE_ID]/export?format=[FORMAT]
    • FORMAT : pdf, svg, png, jpg

You will modify the text in bold to fit your particular situation. For example, if I want students to download a PDF of my example document, the URL would be:

  • https://docs.google.com/document/d/1Srfb6GX2SqTyMqioS81a-aK88EHUNIExGMap5BYxu6s/export?format=pdf

In case you are new to this, here is how you add the URL to the download link you created:

Embedding_Docs_in_eCollege_-_Google_Drive-15

 

This may seem like a lot of steps, but it is pretty easy once you have done a couple of them. As always, you only have to do this once for every document, and the link the link and document ID will stay the same. Let me know if you have any other helpful tricks for embedding Google Docs in your LMS, and happy coding!

Outsmarting the LMS: Embedding Google Docs

I generally love all things Web-related: social media, digital media, coding, learning management systems. You name it. But there are two things I absolutely hate and will avoid whenever possible. Uploading and logging in. I hate them both. They use up valuable time. They're obnoxious. So, I'm left with two options. I can either bite the bullet and just put up with both of those feudal tasks, or I can find a way around it.

Obviously, I chose the second option.

I have been doing this for a few years now, and it really has saved me a lot of time and frustration. This is why I would like to pass on the golden nugget known as embedding Google Docs in your LMS.

Step One: Convert to Google Docs

Before you can embed a Google Doc in your course shell, you have to have a Google Doc to embed. Most of the docs I  use in my class (e.g., assignment descriptions, syllabi, tutorials and FAQs) originally existed as Word docs. Google makes it really easy to convert Word docs into Google Docs. You simply to go your Google Drive, click upload, and choose to convert the document (see below)

TCU_Shared_-_Google_Drive

TCU_Shared_-_Google_Drive

In the event you want to create a Google Doc from scratch, you can read this help document directly from Google. They've already done the work so I don't have to!

Step 2: Grab the Code

After you have created your Google Doc, you will need to grab the HTML code to add to eCollege. You can see this process in the images below:

Embedding_Docs_in_eCollege_-_Google_Drive-5 Embedding_Docs_in_eCollege_-_Google_Drive-2 Embedding_Docs_in_eCollege_-_Google_Drive-5 2

Step 3: Paste and Modify the Code

Now that you have the code in your clipboard, you need to go to the page in your LMS where you want to embed the Google Doc. The following screenshots are taken in eCollege, but there is probably a similar feature in all LMS products.

Student_Teaching_Mid_School_742__Alexander_-3

Student_Teaching_Mid_School_742__Alexander_-3 2

Student_Teaching_Mid_School_742__Alexander_

Notice the extra code I added to the original iFrame code in order to make sure the entire document displays in the LMS. If you do not add the width and height code, it will show up as a small box on the LMS page you created. The width should always be 100%, but the height may vary to ensure the whole document will fit in the frame without extra scrolling.  The end result looks like this below:

Student_Teaching_Mid_School_742__Alexander__and_Embedding_Docs_in_eCollege_-_Google_Drive-4

The beauty of this technique is that when I make a change to the Google Doc, it immediately shows up in eCollege! No uploading and replacing old documents each semester. When I copy my course shell each semester, the HTML is still there so I only have to modify the original Google Doc. I don't think I will ever go back! So, give this a try and see how it works for you. You can also watch an archive of this Google Hangout where I showed this technique to some colleagues. Good luck!

Studying with Google Hangouts on Air

A few months ago I wrote about using Ustream to broadcast an online study session with my large class. I used it twice, and it worked pretty well both times. The main hangup I had with this tool was that I had to download a separate program to display my screen to the students. I was able to figure it out pretty easily, but I prefer tools that do not require any downloads.

This semester when I was planning the different activities for the students, I thought about trying Google Hangouts on Air. I actually thought about using it last semester but there were a few issues that made me gun shy. First of all, there is a significant lag between when I show something and when the audience sees it. This isn't a huge deal, but I was worried it might be a distraction to the students. What I discovered is that this is not even noticeable to the students because they don't know when I start speaking. The other issue I had was that students had to have a Google account in order to post questions. Honestly, I did not want to manage everyone getting a Google account, so I opted for Ustream and TodaysMeet for students to post questions.

After some thought, I jumped in with Hangouts on Air, and I could not be happier about this decision. First of all, students who really want to ask a question will figure out the Google account thing. I did not have one complaint or issue arise over this detail, so it turned out to be nothing to be worried about. Here are some of the features that make Hangouts on Air perfect for an online study session:

  • Q&A: Students can post questions to the Q&A tool, and I select them as I answer each question. The beautiful thing about this tool is that once the session is over, the Q&A tool becomes like a set of bookmarks that will snap to the exact part of the recording that addresses each question. Students to have to be signed into Google to post a question, but as I said before this did not prohibit students from asking their questions.
  • Screen Sharing: Hangouts comes with a lot of built in tools, one of which is screen sharing. This invaluable when it comes to putting up slides from class or drawing diagrams. I mean, who wants to just listen to me talk and see my face for an hour? I would much rather hide behind my bullet points.
  • Browser based: Hangouts is also completely housed in the browser, so there is nothing to download (other than the plug-in which accesses your mic and camera).
  • Scheduled Events: You can actually set up the hangout in advance and invite people to view it. This is very helpful for people like me who tend to forget things because Google will send reminders that the event is coming up.
  • Session Recording: This feature only applies to Hangouts on Air, but once you go live it starts recording. This is also a great way to create screencasts with book marks to different steps in the process.

I was pleasantly surprised how easy this tool is to use, and how many features it has built in. I will definitely use it for future study sessions, and I may even find ways to do it better. In case you are interested. Here is a link to the recording from a few nights ago: Online Study Session.

Presenting with LiveSlide

I am always on a quest to find better ways to control my content during class meetings with my iPad. I have tried just about everything, from mirroring with Airserver to SlideShark, and nothing has quite done what I want. Either the tool is too unpredictable (Airserver) or it is too narrow (SlideShark), so I continue to keep my eyes peeled for ways to present my lectures while mobile in the classroom.

The best solution I have found so far is LiveSlide, a simple browser-based tool that lets you remotely control slides from any device. Teachers can use it as I do, to project content to the class while controlling it from a mobile device, or they can share the slides with their students and have them follow along during class. Students can also take notes on the slides for themselves, and the tool has a few interactive features for questioning and quizzes. I have not used many of these features, but I plan on it in the coming weeks.

LiveSlide is incredibly easy to set up. Since it is browser based, there is no app to install. Educators who sign up with their school e-mail will be automatically upgraded to the Elite account for free.

Once your account is set up, you can either create presentations from scratch or import them from your computer or Google Drive. Obviously, I use the last option since I typically create my presentation with Google Slides anyway. I have imported approximately 20 presentations so far, and I have not had so much as a hiccup during the process.

Students can view slides using one of two options. If they want to simply view the slides, they can join remotely using an access key. The teacher can decide whether or not the students can advance the slides on their own or if they must view them at the teacher's pace. The teacher can add quizzes and polls for students to answer, and students can submit questions while the teacher is presenting. I typically log in from my iPad then join the presentation from whichever computer is connected to the projector.

If students want to make a copy of the slides for themselves, they can pay a small account fee and be added to the course. All slide decks for that class will show up in their account, and they can take notes directly on the slides. I have not used this option, so I cannot verify how the students takes notes (writing on the tablet screen vs. typing). I think this will be a great feature when I begin to use it.

My favorite feature of this tool is that teachers can quickly add content and blank slides to a deck while they are teaching. You can add a YouTube video, take or import a picture, or add a blank slide to draw a diagram. I have already surprised myself a few times by drawing impromptu diagrams or importing a picture for everyone to see. This is a feature not available on any other web-based tool I have used.

There are a few limitations to LiveSlide that I hope will improve over time. For one, there are shape tools (circle, square, and line), but there is no way to move the objects around once they have been added, and I can't figure out how to delete them. I don't use this feature much, but I might if it was more responsive. Also, sometimes the tools disappear from the page if my iPad goes to sleep. I have to reload the page for the drawing tools to come back, which can be a little distracting while I am teaching. If I don't draw attention to myself, I doubt the students know what I am doing. :-)

Overall, I have to say I am quite impressed with this little tool. The team that created and maintains this tool is very responsive (hint, hint ... read that last paragraph). You can learn more about LiveSlide from their YouTube channel, which I plan on viewing carefully in the future. I hope to use more of the features in the near future and write more about it.  Keep up the great work Atlas Learning team.

*Note: There are a few tools on the web that use the name LiveSlide. Make sure you look for the one in the Atlas Learning toolkit. There is also a social network called Liveslide, but that is not something I am interested in at this point. :-)

 

Outsmarting the LMS: Creating Drag and Drop Folders

Update! Since posting this several months ago, Google has disabled embedding a Google Site. It's nice to know my Technology Ninja skills are being noticed (which is the exact opposite of what a ninja actually wants to do). I will leave this tutorial in case Google decides to start playing nice again.

Software developers must have a really distorted view of how professors use their time. Maybe they think we teach a few times per week and spend the rest of our time playing golf or drinking coffee while we complain about students. Maybe they think we enjoy spending hours each semester staring at progress bars while our files upload. Who knows. What I do know is that over the last 10+ years in higher education, I have developed a love/hate relationship with every LMS I have been forced to use. I love them because it is the best way to communicate with my students. When they want to know something, this is where they look first. I can post grades quickly, give feedback on their work, and create a safe place to share information.

I also hate the LMS because most of them are outdated, not very attractive (though that is not really such a big deal), and require redundant work from semester to semester. My goal the last few years has been to outsmart the LMS and find ways to work efficiently despite its limitations. I will spread these ideas out over several posts, which may take me several weeks to work through. The first topic I would like to address is creating drag-n-drop folders for documents and other media.

Step One: Creating Folders in Google Drive

The first step is to download and install the Google Drive desktop app. This is a pretty easy step, and the program runs unnoticeably on your computer. Once you have this installed, it will sync your Google Drive from the cloud to your computer. Anything you create from the computer (folders, files, etc.) will also be instantly synced to the cloud. I like to stay organized, so I created folders for each class, and then created folders within each class folder for the different things I would be sharing with students. This includes assigned readings, PPT files, assignment descriptions, etc. I already had some of my files ready for the new semester, so I copied them into the appropriate folders.

Step Two: Embed Folders into Google Sites

This is the step that might be a deal breaker for some people. As you may know, you can share a Google Drive folder with anyone with the link, which is a pretty handy feature when you want to share a bunch of stuff that might exceed the e-mail attachment limit. Unfortunately, Google has blocked the folder view in Drive from being embedded using the iframe tag in HTML. If you do this, you will be met with a blank box in the middle of your webpage. The only way to embed dynamic content from a Google Drive folder is to embed it in a Google Sites page. Sites has a widget for embedding an entire folder. So, for every folder you want to share with students, you will have to create a webpage for that folder. In order to keep myself organized, I structured the Google Site exactly like the folders in Google Drive. For example, I created a page for each class, then I made a page under that page for each folder I want to share. This took some time, but I should only have to do this once. I can always make more pages and folders, but the basic structure is there.

Step Three: Embed the Google Sites Pages

The final step is pretty straight forward. You do not need to know a lot of HTML to embed the Google Sites pages into your LMS. My institution uses Pearson LearningStudio, which allows me to directly edit the HTML. First, I created a tab, or Unit as they call it, for each folder. I then used the following code to embed the webpage on that tab:

<iframe src="http://www.somepage.com" width="100%" height="1000"></iframe>

You may need to adjust the settings of your Google Sites page so the embedded folder will stand out, but that is an easy fix. It should look something like this:

Crit_Investgatn_Teach_Learning_040__Alexander_

The beauty of this system is two-fold. First, any time I want to add or delete files from a folder, I just do it from the Google Drive folder on my computer and the changes are immediately synced anywhere the folder is embedded. I can also edit files and the changes are immediately synced. Second, this code is preserved anytime I copy a course to a new semester. So, I only have to do this once and all of my content follows.

What hacks have you come up with to make the LMS easier to deal with? I would love to hear your ideas.

Video Conference Tools: Choices, choices

Tonight in my graduate technology class, we spent most of the meeting testing and discussing a variety of video conferencing tools. I had a few criteria for choosing the tools we would demo:

  1. The tool had to have at least a free entry-level account
  2. The tool had to stream a video feed in real time
  3. The tool could not rely on installed software on both sides of the call (I strayed from this criterion with Skype)

So, my criteria were pretty simple, but considering the context of my learning environment, each of these was pretty important. I teach in a computer lab, and the computers do not allow installations. I did not have time to install software ahead of time, so I stuck close to applications that don't require a download and installation. The tools I chose were:

You can see the detailed results of our class meeting on Video Conferencing document.

Skype

The first tool we looked at was Skype. This video tool has been around for quite awhile, in tech years. I remember using it in 2006 to conference with people at different universities all over the country, and even then it worked pretty well. The main problem then was the hardware. Webcams were clunky and unpredictable. They required extra drivers and programs to work. But for a free tool, it was pretty amazing. Well, it hasn't changed much since then, and all changes have been for the better.

Because the lab computer did not have Skype or webcams and microphones, I had to demo this tool using to of my devices. So, I displayed my MacBook for the class using the projector, and I called myself using my wife's Skype account on my iPad. The students could see both ends of the call with the devices in the lab, and we were able to discuss most of the features of the tool. Even though this tool requires each user to install the program, it is quite easy to use and has several applications in schools. My favorite is Mystery Skype, which I have not had a chance to do yet. Skype allows for conference video call with up to 10 users.

Google Hangouts

The next tool we looked at was Google Hangouts. I had never actually used this tool before because, well, I don't really have a reason to. I had looked into using it with a different class I teach, but it was not a good match for what I was trying to do. So, I was excited to see how this would work with a class of 7 people. Each person had a Google account for other projects we have been working on, so I knew everyone would be able to join the session.

The process for joining the Hangout was a little more involved than I had thought it would be, but I pointed out to my class that it gets easier after they have done it a couple of times. One everyone was in, we were able to test the different features of this tool. We looked at screen sharing, chat, YouTube sharing, and I even tried on a few of the silly masks and hats. Since the students did not have webcams, we were not able to share control of the meeting, but I think they got the point. One constraint to this tool for large classes is that only 10 people can join a Hangout at one time. Hangouts on Air allows unlimited viewers, but as I will discuss, there are some limitations

After using Hangouts for a few minutes, we switched over to Google Hangouts on Air. I showed them my screen as I set up the live broadcast, then I showed them how to find the live feed. I enabled the Q&A feature (which in order to use, users must be logged in with a Google account)  before I broadcast the meeting, and we were able to post a few questions and answers, which when clicked snap directly to each response without watching the entire video. We also used a stopwatch to monitor the lag time between when I did something on the screen and when the viewers actually saw. We determined that it was about 45 seconds, which was better than the first time I used Hangouts on Air.

One feature I personally like about Hangouts on Air is that the broadcast is automatically recorded and sent to my YouTube account. This removes the Q&A responses from the video, but it quickly creates an archive that others can watch within minutes of the original broadcast. If viewers access the recording from my Google+ profile, the questions and answers are still there. Overall, I am impressed by the many features of this tool. Logistically, I will need to think through how to use the Q&A tool with my class, but compared to other tools it is pretty easy to set up and use.

Join.Me

I first found out about this tool a few years back when I had to train a new instructor in a different state how to use Moodle. Even though she could not figure out the audio call feature and we had to use the phone, it was a great way for me to walk her through the LMS and answer questions about the course. Since then, this tool seems to have gotten even better and it is a great way to communicate with people, especially if you are helping them troubleshoot a problem on their computer or performing a demo of some software that runs on your machine.

Of all the solutions so far, this is the easiest one for collaborating or conferencing with a small group of people. The person who initiates the call is given a 9-digit code, which users can enter to join. The session can either be hosted directly through the browser, or users can install the join.me application on their computers, which allows the extra benefit of different people taking turns sharing their screens. The browser option only allows the session initiator to share his screen, which in this case was me.

Join.Me also has an audio feature where attendees can talk using an internet connection or phone call. Since no one in the class had a microphone, we were not able to test this feature, but when I joined the session from my iPad, the call feature worked great. This tool also has the ability to allow different attendees to control the host computer, and you can send files to the users from your computer. In terms of attendee engagement, there is a chat feature for questions or backchannel jibber jabber. Each session, when using the free account, allows 10 people to join a session.

Ustream

The final tool we looked at, which I have written about before, was Ustream. This is similar to Hangouts on Air, but there are some unique differences that make it better suited from some types of presentations. There are two ways to broadcast to a large audience: Broadcaster and Producer. Broadcaster works directly through the browser and only shows video from the webcam. There is no way to share your screen, which may be a limitation for some types of presentations. Producer is a free application you can download from Ustream, and it does enable screen sharing using yet another downloaded app. This option was a little hard to figure out the first time I was testing it, but it was pretty simple once I got used to it. Compared to Hangouts on Air, the lag time is much better. We tested it a couple of times, and it was around 15 seconds.

This tool does not automatically record broadcasts, but you have that option if you want. The presenter can turn the record feature on an off during the presentation, which might be a good way to break it up into smaller segments for later viewing. Whereas the landing page for Hangouts on Air is the presenters profile on Google+, Ustream lets you set up a "channel" that serves as a hub for all of your presentations. I like this better than the Google+ profile page, which serves as a hub for all my posts and updates. Ustream would definitely be easier to navigate as a student who is trying to find an archived recording because the broadcasts are not crowded out by other content. Recordings can also be migrated to YouTube if you want to embed it in a web page or blog.

Each broadcast also has a Social Stream feature, but users must be  logged into Facebook, Twitter, or Ustream to post questions. I am pretty sure my students don't want their questions showing up in their Twitter feeds, so this may not be a great feature for all people. Just like Hangouts on Air, an unlimited number of users can view the presentation, but it is a one-way conversation. If you are collaborating with a small number of people, I recommend one of the other options.

And the winner is ...

Clearly, each tool we tested in my class has its unique set of features and some limitations. Some are good for small group collaboration, others are good for large presentations. Some are better for screen sharing, and others are good for performances. Just like with all technology solutions, you need to analyze the context in which the tool will be used before you settle on a tool. The context should dictate your choice of tool. This was a great experience for my students, and the whole process was actually pretty fun. I think 4 different tools is the ideal number to test in a 2-hour class meeting, and each student walked away with some good information about the affordances and constraints of different video conferencing tools.